Replacement PTAC Units in Manhattan
Manhattan runs on high-rise hotels, postwar co-op and condo towers, and office buildings converted to apartments. Many of those rooms still have the PTAC or through-the-wall unit the building opened with. When one fails, you need a unit that fits the sleeve, matches the voltage, and gets up the freight elevator in the window the building gives you.
Call 800-866-1210 about a replacement in Manhattan.
Buildings in Manhattan that run PTAC units
Business, tourist, and extended-stay hotels with hundreds of guest room units per property.
Postwar towers on the East Side, West Side, and in Lower Manhattan where shareholders and owners replace units one at a time.
Older commercial buildings in Lower Manhattan and Midtown turned into apartments with PTACs in the new layout.
Medical offices, dormitories, and campus buildings that heat and cool room by room.
Common Manhattan replacement situations
265V towers
Many Manhattan high-rises supply 265V to the rooms, often hardwired. Your replacement has to match. Check the old nameplate before you order. A 208/230V unit in a 265V room is an expensive mistake.
Hydronic units on the building boiler
Older towers often heat with a central boiler and PTACs that carry a hot water coil. A hydronic replacement from Applied Comfort keeps the building heating plan intact.
Board and Landmarks rules
Co-op boards and the Landmarks Preservation Commission often control what goes in the facade. A chassis built to the existing sleeve keeps the louver unchanged. Discontinued McQuay units get McQuay replacement chassis.
Delivery to Manhattan
Units ship to Manhattan from the Air Distributors warehouse in Louisville, Kentucky, or direct from manufacturer stock.
Plan the delivery around the building. Most Manhattan properties have no loading dock, a short loading window, and a freight elevator that has to be reserved. Many buildings require a certificate of insurance from the carrier before they accept a delivery. Send the managing agent's COI requirements with your quote request so the paperwork is ready before the truck is booked.
On multi-floor jobs, ask for units labeled by floor or line so your crew stages them without sorting.
What to send for a quote
- Model number from the existing unit's nameplate
- Sleeve width, height, and depth
- Voltage and amperage
- Heat type: electric, heat pump, or hydronic
- Quantity and delivery address
Nearby service areas
Need a replacement PTAC for a New York building?
Send the old model number, the sleeve size, voltage, heat source, quantity, and your building's delivery rules. A factory-authorized distributor replies with a quote, lead time, and freight to your door anywhere in the metro.